Assigning ownership to disks for NetApp OnTap 8.2p2 Cluster mode

After replacing broken disks for NetApp Storage and if you want to manually assigned ownership back to the newly replaced but assigned disks, you can use the following command

1. Show Storage Ownership Information

My-NetApp-Cluster::> storage disk show -spare
Original Owner: acai-cluster1-01
  Checksum Compatibility: block
                                                            Usable Physical
    Disk            HA Shelf Bay Chan   Pool  Type    RPM     Size     Size Owner
    --------------- ------------ ---- ------ ----- ------ -------- -------- --------
    cluster1-01:0b.00.9
                    0b     0   9    B  Pool0  BSAS   7200   1.62TB   1.62TB cluster1-01
Original Owner: cluster1-02
  Checksum Compatibility: block
                                                            Usable Physical
    Disk            HA Shelf Bay Chan   Pool  Type    RPM     Size     Size Owner
    --------------- ------------ ---- ------ ----- ------ -------- -------- --------
    cluster1-02:0a.00.7
                    0a     0   7    B  Pool0  BSAS   7200   1.62TB   1.62TB cluster1-02
.....
.....

2. Display all unowned disks by entering the following command:

My-NetApp-Cluster::> storage disk show -container-type unassigned


                     Usable           Container
Disk                   Size Shelf Bay Type        Position   Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
cluster1-01:0b.00.9
                     1.62TB     0   9 spare       present    -         cluster1-01
cluster1-02:0a.00.7
                     1.62TB     0   7 spare       present    -         cluster1-02

3. Assign each disk by entering the following command

My-NetApp-Cluster::> storage disk assign -disk cluster1-01:0b.00.9 -owner cluster1-01

Identify broken disk for NetApp OnTap 8.2p2 Cluster mode

1. Identify the Cluster Nodes

My-NetApp-Cluster::> cluster show

Node                  Health  Eligibility
--------------------- ------- ------------
cluster1-01      true    true
cluster1-02      true    true
cluster1-03      true    true
cluster1-04      true    true
4 entries were displayed.

2. Check for Broken Disk

My-NetApp-Cluster::> run -node cluster1-01 vol status -f
RAID Disk Device   HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
--------- ------   ------------- ---- ---- ---- ----- --------------    --------------
failed   0a.00.12 0a    0   12  SA:A   -  BSAS  7200 1695466/3472315904 1695759/3472914816 
failed   0b.00.9  0b    0   9   SA:B   -  BSAS  7200 1695466/3472315904 1695759/3472914816

3. Get System Information

My-NetApp-Cluster::> run -node cluster1-01 sysconfig -a
NetApp Release 8.2P2 Cluster-Mode: Sat Jul 20 20:31:47 PDT 2013
.....
.....
.....

4. Get further Information

My-NetApp-Cluster::> run -node cluster1-01 sysconfig -r
Aggregate storage1_aggr1 (online, mixed_raid_type, hybrid) (block checksums)
.....
.....