Tool 1: Display Information about CPU Architecture

[user1@node1 ~]$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 85
Model name: Intel(R) Xeon(R) Gold 6134 CPU @ 3.20GHz
Stepping: 4
CPU MHz: 3200.000
BogoMIPS: 6400.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 1024K
L3 cache: 25344K
NUMA node0 CPU(s): 0-7,16-23
NUMA node1 CPU(s): 8-15,24-31
.....
.....

Tool 2: List all PCI devices

[user1@node1 ~]# lspci -t -vv
-+-[0000:d7]-+-00.0-[d8]--
| +-01.0-[d9]--
| +-02.0-[da]--
| +-03.0-[db]--
| +-05.0 Intel Corporation Device 2034
| +-05.2 Intel Corporation Sky Lake-E RAS Configuration Registers
| +-05.4 Intel Corporation Device 2036
| +-0e.0 Intel Corporation Device 2058
| +-0e.1 Intel Corporation Device 2059
| +-0f.0 Intel Corporation Device 2058
| +-0f.1 Intel Corporation Device 2059
| +-10.0 Intel Corporation Device 2058
| +-10.1 Intel Corporation Device 2059
| +-12.0 Intel Corporation Sky Lake-E M3KTI Registers
| +-12.1 Intel Corporation Sky Lake-E M3KTI Registers
| +-12.2 Intel Corporation Sky Lake-E M3KTI Registers
| +-12.4 Intel Corporation Sky Lake-E M3KTI Registers
| +-12.5 Intel Corporation Sky Lake-E M3KTI Registers
| +-15.0 Intel Corporation Sky Lake-E M2PCI Registers
| +-16.0 Intel Corporation Sky Lake-E M2PCI Registers
| +-16.4 Intel Corporation Sky Lake-E M2PCI Registers
| \-17.0 Intel Corporation Sky Lake-E M2PCI Registers
.....
.....

Tool 3: List all PCI devices

[user@node1 ~]# lsblk
sda 8:0 0 1.1T 0 disk
├─sda1 8:1 0 200M 0 part /boot/efi
├─sda2 8:2 0 1G 0 part /boot
└─sda3 8:3 0 1.1T 0 part
├─centos-root 253:0 0 50G 0 lvm /
├─centos-swap 253:1 0 4G 0 lvm [SWAP]
└─centos-home 253:2 0 1T 0 lvm

Tool 4: See flags kernel booted with

[user@node1 ~]
BOOT_IMAGE=/vmlinuz-3.10.0-693.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8

Tool 5: Display available network interfaces

[root@hpc-gekko1 ~]# ifconfig -a
eno1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether XX:XX:XX:XX:XX:XX txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
.....
.....
.....

Tool 6 Using dmidecode to find hardware information
See Using dmidecode to find hardware information