Enabling SRIOV in BIOS for IBM Servers and Blade Servers

Step 1: Power on the system, and press F1 to enter the Setup utility.

Step 2: Select System Settings and then Network.

Step 3: Under the Network Device List, select the device to be configured and press Enter to see all the Network Device options (Figure 1).


Step 4: Select the device’s description and press Enter to configure the device (Figure 2)


Step 5: From the selection menu, select Advanced Mode and press Enter to change the value (Figure 3).


Step 6: Choose Enable and press Enter.

Step 7: On the same selection menu, select Controller Configuration and press Enter to enter the configuration menu.

Step 8: Select Configure SRIOV and hit Enter.

Step 9: On the Configure SRIOV page, press Enter to toggle the values

Step 10: Select Enable and press Enter

Step 11: Select Save Current Configurations and press Enter.

Step 12: Press Esc to exit the menu. Then, click Save to save the configuration.

Step 13: Reboot the system.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.