Method 1: Using Ethernet and lspci

[root@hpc-node1 ~]# ethtool -i ens3f1np1
driver: mlx5_core
version: 25.10-1.7.1
firmware-version: 26.43.2026 (MT_0000000575)
expansion-rom-version: 
bus-info: 0000:5d:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: yes

[root@hpc-node1 ~]lspci -s 0000:5d:00.1
0000:5d:00.1 Ethernet controller: Mellanox Technologies MT2894 Family [ConnectX-6 Lx]

Method 2: Using Ishw

[root@hpc-wfly-i022 ~]# lshw -C network
.....
.....
*-network:1
       description: Ethernet interface
       product: MT2894 Family [ConnectX-6 Lx]
       vendor: Mellanox Technologies
       physical id: 0.1
       bus info: pci@0000:5d:00.1
       logical name: ens3f1
       version: 00
       serial: 50:00:e6:73:b5:15
       capacity: 10Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pciexpress vpd msix pm bus_master cap_list rom ethernet physical fibre 1000bt-fd 10000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=mlx5_core driverversion=4.18.0-553.54.1.el8_10.x86_64 firmware=26.43.2026 (MT_0000000575) latency=0 link=no multicast=yes port=fibre
       resources: iomemory:1f3f0-1f3ef irq:17 memory:1f3ffa000000-1f3ffbffffff memory:b5f00000-b5ffffff
.....
.....